2022-02-17
A shower is a key cornerstone feature of a bathroom that can be a major influence on the design and usability of your room space.
To take a step further, and away from it being located over a bathtub, you need a shower enclosure. But where do you start? If you have only just started looking for a shower enclosure, you may be a bit overwhelmed by the names and selection on offer.
What to consider when buying a shower enclosure
Space
It may seem obvious, but the first thing you will need to consider is whether you can actually fit a shower enclosure into your bathroom.
If you are making a like-for-like change with an old enclosure or swapping a bath for a shower, this should make it more straightforward. However, if you are fitting an enclosure into a space for the very first time, you will need to consider the dimensions of your room.
You should also consider the type of room you are looking to create a shower enclosure for. Is it for your main bathroom? Alternatively, is it for an ensuite or separate shower room? This may influence the type of shower enclosure that is right for your needs. Proper planning makes it possible to fit a shower into a tight area.
How to measure for a shower enclosure
When measuring for a shower enclosure, you will need the height, width and depth of the space where the enclosure will be installed. Always double-check these measurements.
If the enclosure is going to be fitted between two walls, you will need to take three measurements, each at different heights, because the distance between the walls is unlikely to be the same all the way up. If your enclosure is going to be fitted into a corner, you will need to measure from the outside of the shower tray to the wall on each side.
Location
It is important that you think about where you want to place your shower enclosure because it can have an impact on other issues.
Will it be in the corner, like many enclosures, or in a separate enclosed area, such as an alcove? You could even have it against a single wall if you have a large space. This will all impact the type of shower enclosure and enclosure door you need. As we’ve said, if you are fitting in a recessed enclosure, you may only need a door, rather than a full enclosure.
Also, if you are replacing an old shower enclosure or swapping a bathtub for an enclosure, place your new shower in the same position as your old one, if you can. This will then require a lot less plumbing work, potentially saving money, as your water pipes and drainage will already be in the correct place.
Ebath is one of the shower enclosure manufacturers and bathroom mirrors suppliers. This website provides relevant information such as pictures of products. We provide you with a full range of picture references when shopping for goods, providing a pleasant online shopping experience!
Our mission is to provide customers with high-quality, best-selling products.
Welcome to choose Ebath - one of the shower enclosure manufacturers and bathroom mirrors suppliers.
